| Code |
Description |
| F001 |
The following spent halogenated
solvents used in degreasing: Tetrachloroethylene,
trichlorethylene, methylene chloride,
1,1,1-trichloroethane, carbon tetrachloride and
chlorinated fluorocarbons; all spent solvent
mixtures/blends used in degreasing containing,
before use, a total of ten percent or more (by
volume) of one or more of the above halogenated
solvents or those solvents listed in F002, F004,
and F005; and still bottoms from the recovery of
these spent solvents and spent solvent mixtures. |
| F002 |
The following spent halogenated
solvents: Tetrachloroethylene, methylene
chloride, trichloroethylene,
1,1,1-trichloroethane, chlorobenzene,
1,1,2-trichloro-1,2,2-trifluoroethane,
ortho-dichlorobenzene, trichlorofluoromethane,
and 1,1,2-trichloroethane; all spent solvent
mixtures/blends containing, before use, a total
of ten percent or more (by volume) of one or more
of the above halogenated solvents or those
solvents listed in F001, F004, and F005; and
still bottoms from the recovery of these spent
solvents and spent solvent mixtures. |
| F003 |
The following spent
non-halogenated solvents: Xylene, acetone, ethyl
acetate, ethyl benzene, ethyl ether, methyl
isobutyl ketone, n-butyl alcohol, cyclohexanone,
and methanol; all spent solvent mixtures/blends
containing, before use, only the above spent
non-halogenated solvents; and all spent solvent
mixtures/blends containing, before use, one or
more of the above non-halogenated solvents, and a
total of ten percent or more (by volume) of one
or more of those solvents listed in F001, F002,
F004, and F005; and still bottoms from the
recovery of these spent solvents and spent
mixtures. |
| F004 |
The following spent
non-halogenated solvents: cresols, cresylic acid,
and nitrobenzene; all spent solvent
mixtures/blends containing, before use, a total
of ten percent or more (by volume) of one or more
of the above non-halogenated solvents or those
solvents listed in F001, F002, and F005; and
still bottoms from the recovery of these spent
solvents and spent solvent mixtures. |
| F005 |
The following spent
non-halogenated solvents: toluene, methyl ethyl
ketone, carbon disulfide, isobutanol, pyridine,
benzene, 2-ethoxyethanol, and 2-nitropropane; all
spent solvent mixtures/blends containing, before
use, a total of ten percent or more (by volume)
of one or more of the above non-halogenated
solvents or those solvents listed in F001, F002
or F004; and still bottoms from the recovery of
these spent solvents and spent solvent mixtures. |
| F006 |
Wastewater treatment sludges
from electroplating operations except from the
following processes: (1) sulfuric acid anodizing
of aluminum; (2) tin plating on carbon steel; (3)
zinc plating (segregated basis) on carbon steel;
(4) aluminum or zinc-aluminum plating on carbon
steel; (5) cleaning/stripping associated with
tin, zinc, and aluminum plating on carbon steel;
and (6) chemical etching and milling aluminum. |
| F007 |
Spent cyanide plating bath
solutions from electroplating operations. |
| F008 |
Plating bath residues from the
bottom of plating baths from electroplating
operations in which cyanides are used in the
process. |
| F009 |
Spent stripping and cleaning
bath solutions from electroplating operations in
which cyanides are used in the process. |
| F010 |
Quenching bath residues from oil
baths from metal heat treating operations in
which cyanides are used in the process. |
| F011 |
Spent cyanide solutions from
salt bath pot cleaning from metal heat treating
operations. |
| F012 |
Quenching wastewater treatment
sludges from metal heat treating operations in
which cyanides are used in the process. |
| F019 |
Wastewater treatment sludges
from the chemical conversion coating of aluminum
except from zirconium phosphating in aluminum can
washing when such phosphating is an exclusive
conversion coating process. |
| F020 |
Wastes (except wastewater and
spent carbon from hydrogen chloride purification)
from the production or manufacturing use (as a
reactant, chemical intermediate, or component in
a formulating process) or tri- or
tetrachlorophenol or of intermediates used to
produce their pesticide derivatives. (This
listing does not include wastes from the
production of hexachlorophene from highly
perified 2,4,5-trichlorophenol.) |
| F021 |
Wastes (except wastewater and
spent carbon from hydrogen chloride purification)
from the production or manufacturing use (as a
reactant, chemical intermediate, or component in
a formulating process) of pentachlorophenol, or
of intermediates used to produce derivatives. |
| F022 |
Wastes (except wastewater and
spent carbon from hydrogen chloride purification)
from the manufacturing use (as a reactant,
chemical intermediate, or component in a
formulating process) of tetra- or penta- or
hexachlorobenzenes under alkaline conditions. |
| F023 |
Wastes (except wastewater and
spent carbon from hydrogen chloride purification)
from the production of materials on equipment
previously used for the production or
manuacturing use (as a reactant, chemical
intermediate, or component in formulating
process) or tri- and tetrachlorophenols. (This
listing does not includes wastes form equipment
used only for the production or use of
hexachlorophene from highly purified
2,4,5-trichlorophenol) |
| F024 |
Process wastes including, but
not limited to, distillation residues, heavy
ends, tars, and reactor clean-out wastes, from
the production of certain chloronated aliphatic
hydrocarbons by free radical catalyzed processes.
These chlorinated aliphatic hydrocarbons are
those having carbon chain lengths ranging from
one to and including five, with varying amounts
and positions of chlorine substitution. (This
listing does not include wastewaters, wastewater
treatement sludges, spent catalysts, and waste
listed in Sections 261.31 or 261.32) |
| F025 |
Condensed light ends, spent
filters and filter aids, and spent desiccant
wastes from the production of certain chloronated
aliphatic hydrocarbons, by free radical catalyzed
processes. These chlorinated aliphatic
hydrocarbons are those having carbon chain
lengths ranging from one, to and including five,
with varying amounts and positions of chlorine
substitution. |
| F026 |
Wastes (except wastewater and
spent carbon from hydrogen chloride purification)
from the production of materials on equipment
previously used for the manufacturing use (as a
reactant, chemical intermediate, or component in
a formulating process) of tetra-, penta-, or
hexachlorobenzene under alkaline conditions. |
| F027 |
Discarded unused formulations
containing tri-, tetra-, or pentachlorophenol or
discardedd unused formulations containing
compounds derived from these chlorophenols. (This
listing does not include formulations containing
hexachlorophene synthesized from prepurified
2,4,5-trichlorophenol as the sole component.) |
| F028 |
Residues resulting from the
incinerations or thermal treatment of soil
contaminated with EPA hazardous waste nos. F020,
F021, F022, F023, F026, and F027. |
| F032 |
Wastewaters, process residuals,
preservative drippage, and spent formulations
from wood preserving processes generated at
plants that currently use, or have previously
used, chlorophenolic formulations [except
potentially cross-contaminated wastes that have
had the F032 waste code deleted in accordance
with Section 261.35 (i.e., the newly promugulated
equipment cleaning or replacement standards), and
where the generator does not resume or initiate
use of chlorophenolic formulations]. This listing
does not include K001 bottom sediment sludge from
the treatment of wastewater from wood preserving
processes that use creosote and/or
pentachlorophenol. |
| F034 |
Wastewaters, process residuals,
preservative drippage, and spent formulations
from wood preserving processes generated at
plants that use creosote formulations. This
listing does not include K001 bottom sediment
sludge from the treatment of wastewater from wood
preerving processes that use creosote and/or
pentachlorophenol. |
| F035 |
Wastewaters, process residuals,
preservative drippage, and spent formulations
from wood preserving processes generated at
plants that use inorganic preservatives
containing arsenic or chromium. This listing does
not include K001 bottom sediment sludge from the
treatment of wastewater from wood preserving
processes that use creosote and/or
pentachlorophenol. |
| F037 |
Petroleum refinery primary
oil/water/solids separation sludge - Any sludge
generated from the gravitational separation of
oil/water/solids during the storage or treatment
of process wastewaters and oily cooling
wastewaters from petroleum refineries. Such
sludges include, but are not limited to, those
generated in oil/water/solids separators; tanks
and impoundments; ditches and other conveyances;
sumps; and storm water units receiving dry
weather flow. Sludges generated in storm water
units that do not receive dry weather flow,
sludges generated in aggressive biological
treatment units as defined in Section
261,31(b)(2) (including sludges generated in one
or more additional units after wastewaters have
been treated in aggressive biological treatment
units), and K051 wastes are exempted from this
listing. |
| F038 |
Petroleum refinery secondary
(emulsified) oil/water/solids separation sludge -
Any sludge and/or float generated from the
physical and/or chemical separation of
oil/water/solids in process wastewaters and oily
cooling wastewaters from petroleum refineries.
Such wastes include, but are not limited to, all
sludges and floats generated in induced air
flotation (IAF) units, tank and impoundments, and
all sludges generated in DAF units. Sludges
generated in stormwater units that do nor receive
dry weather flow, sludges generated in aggressive
biological treatment units as defined in Section
261.32(b)(2) (including sludges generated in one
or more additional units after wastewaters have
been treated in aggressive biological treatment
units), and F037, K048, and K051 wastes are
exempted from this listing. |
| F039 |
Leachate resulting from the
treatment, storage, or disposal of wastes
classified by more than one waste code under
Subpart D, or from a mixture of wastes classified
under Subparts C and D of this part. (Leachate
resulting from the management of one or more of
the following EPA Hazardous Wastes and no other
hazardous wastes retains its hazardous waste
code(s): F020, F021, F022, F023, F026, F027,
and/or F028.) |
